Evolution Radio Control :: EVO-ESC-p-list

ELECTRONIC SPEED CONTROLLERS.

AVAILABLE ONLY DIRECT FROM EVOLUTION RADIO CONTROL.

BATTERY POWER ESC’s FOR 2 to 9 CHANNEL 2.4 GHz DIGITAL PROPORTIONAL R/C. Feb 1^st 2010

EVOLUTION ESC’s uses any low cost Park Flyer 2.4 Ghz R/C equipment.

We have tested and approve the following 2.4GHz R/C systems for use with EVOLUTION.

SPEKTRUM DX5e TX and AR500 RX

PLANET TWISTER T5 TX and R6M RX

HOBBY KING HK-T6A TX and HK-TR6A RX

E-SKY ET61 TX and 731/1367 RX's.

Each locomotive will require one RX plus one or the other of the ESC's listed below.
Constant brightness directional lighting & sound triggers are NOT fitted to the B SERIES ESC's.

Constant brightness directional lighting outputs are built into the PnP ESC's.

The EVOLUTION ESC’s are designed for both basic & advanced operation.

There are six different EVOLUTION ESC’s which are tailored to suit different situations.

They will be available at discounted prices until sold out

EVOLUTION ESC’s have an LED on the pcb. When the loco is switched ON this LED shows that the automatic sense for signal neutral has worked properly. We even provide the plug in servo cable(s).

EVOLUTION ESC’s use the same reliable hardware as our well known RCS equipment.

SOUND SYSTEMS: The EVO-E9 has both directional lighting and sound triggers built in. The other ESC's require the separate purchase of the # 2-M-F to trigger 2 x sounds.
Use EVOLUTION ESC’s as is with most sound systems. SIERRA^® requires the # SSI-12v5.

Click on the thumbnail pictures below for a more detailed description.

Please note. The AU$ price is fixed. Other currencies will vary with fluctuating exchange rates.

Click here for an up to date currency conversion.

Model	Price	Description
ELECTRONIC SPEED CONTROLLERS.
EVO-B3	A$79	Basic 3 amp. No Lighting outputs or sound triggers. Requires # 2-M-F for sound triggers.
EVO-B5	A$79	Basic 5 amp. No Lighting outputs or sound triggers. Requires # 2-M-F for sound triggers. SEE OUR SPECIALS PAGE
EVO-B10	A$149	Basic 10 amp. No Lighting outputs. or sound triggers. Requires # 2-M-F for sound triggers.
EVO-PnPAC	A$99	3 amp Plug'n'Play ESC for Aristocraft^® locos with the standard PnP socket. Requires # 2-M-F for sound triggers.
EVO-PnPBK	A$99	3 amp Plug'n'Play ESC for & Bachmann^® locos with the standard PnP socket. Requires # 2-M-F for sound triggers.
EVO-E9	A$179	9 amp high voltage ESC. Real power for consisting multiple unit big locos. Built in directional lights and sound triggers.
OPTIONAL EXTRA PERFORMANCE ENHANCERS.
2-M-F	A$39	A small pcb for two sound triggers.
SSI-12v5	A$54	Sierra Sound interface. Permits SIERRA to be used with PWM output ESC.
BINDER	A$10	Pushbutton on lead for externally binding the TX to RX. Use only with Spektrum and Hobby King radios.

BATTERY VOLTAGE:
All battery packs state a NOMINAL voltage on the pack.
When freshly charged the actual voltage can exceed the NOMINALvoltage.
eg. An 18 volt Ni-Cd pack can read 22+ volts when fully charged.
EVOLUTION takes into account the excess voltage when batteries are freshly charged, when listing what is the maximum voltage you can use.
It is the NOMINALvoltage on the battery pack that is the maximum voltage you can use.

The pcb’s have appropriate heat sinking. A cooling fan may be required for use at higher voltages & temperatures.

NB. THE POWER RATINGS ARE BASED ON 15 VOLTS. HIGHER VOLTAGES MAY REQUIRE FAN COOLING.

SEE THE ACCESSORIES LIST FOR INFORMATION ON RCS LOCO INSTALLATION KITS & BATTERIES.

THE EVOLUTION ONE YEAR GUARANTEE IS CONDITIONAL ON THE ESC BEING INSTALLED AS PER THE EVOLUTION INSTRUCTIONS.
DAMAGE CAUSED BY MISUSE WILL BE OBVIOUS TO US & IS NOT GUARANTEED.

IF YOU BLOW IT UP & TELL US HOW YOU DID IT, WE MAY WARRANT THE ITEM ANYWAY.

THE PWM OUTPUT OF THESE MOTOR DRIVERS SHOULD NOT BE USED WITH ANY DCC DECODER EQUIPPED LOCOS.

PLEASE NOTE.

EVOLUTION DOES NOT PROVIDE PRINTED INSTRUCTIONS FOR ESC'S UNLESS SPECIFICALLY ASKED TO DO SO.

PDF instruction booklets are available for the brand of R/C being used + FIVE different sound systems.